Measure the ceiling cut-out
Compare the actual opening with the model drawing. The outer trim diameter is a separate measurement and cannot substitute for the cut-out.

Image 1 of 15
SMART LED DOWNLIGHT
A recessed offer listing 2.5-inch and 6-inch options plus 18W wording. Confirm which physical variant carries that power rating and test its app, remote and driver together.
PRODUCT DETAILS
PRODUCT DETAIL & BUYER BRIEF
Approve the physical opening, complete driver assembly and tested control arrangement for the project variant.
Compare the actual opening with the model drawing. The outer trim diameter is a separate measurement and cannot substitute for the cut-out.
Measure the recess, clearance above the ceiling and space needed for the driver and wiring before approving the fixture.
Identify the driver supplied with the quoted variant and check its dimensions, input label, connector and pack inclusion on a complete sample.
Request separate electrical and cut-out sheets for each selected size; verify the 18W label on the matching sample.
Set up only the app, remote or platform named for this version. Check first pairing, dimming and the state after power is restored.
If the project uses groups or a shared controller, operate the intended number of downlights together and record any start-up difference.
Check the actual beam, colour and usable output in the proposed room; a nominal size or wattage does not establish the lighting result.
Record the cut-out, trim, depth, driver, input, control path and unit count together on the sample approval and quote.
OEM & PRIVATE-LABEL OPTIONS
HAVE A PRODUCT IN MIND?
For size-to-power mapping, send the opening, outer diameter, installation depth, power, driver, control method, quantity and project packaging needs.