Shieldaily
Request a Quote

SMART LED DOWNLIGHT

2.5-Inch 9W Smart Anti-Glare Downlight

A listed 2.5-inch, 9W full-spectrum downlight with three white-light modes. Verify how the modes are selected and obtain the actual cut-out and driver details for the chosen sample.

PRODUCT DETAILS

Lamp format
Downlight
Light / adjustment
Full-Spectrum
Size option
2.5 in
Power option
9W
Optic wording
Anti-glare

PRODUCT DETAIL & BUYER BRIEF

What Should Buyers Confirm Before Installing This Downlight?

Approve the physical opening, complete driver assembly and tested control arrangement for the project variant.

01

Measure the ceiling cut-out

Compare the actual opening with the model drawing. The outer trim diameter is a separate measurement and cannot substitute for the cut-out.

02

Check the available installation depth

Measure the recess, clearance above the ceiling and space needed for the driver and wiring before approving the fixture.

03

Confirm the driver and connector

Identify the driver supplied with the quoted variant and check its dimensions, input label, connector and pack inclusion on a complete sample.

04

Check three white modes on the 2.5-inch option

Measure the actual cut-out and trim and record the switching sequence for all listed white settings.

05

Test the stated lighting control

Operate the switching or dimming method named on the quote with the supplied driver and fixture.

06

Test several units as installed

If the project uses groups or a shared controller, operate the intended number of downlights together and record any start-up difference.

07

Review colour and spectrum evidence

Request model-specific light data and the test conditions behind full-spectrum, low-blue-light or eye-care wording before approving project or retail claims.

08

Approve one project configuration

Record the cut-out, trim, depth, driver, input, control path and unit count together on the sample approval and quote.

HAVE A PRODUCT IN MIND?

Request a Downlight Project Quote

For three white modes on the 2.5-inch option, send the opening, outer diameter, installation depth, power, driver, control method, quantity and project packaging needs.

Send product requirements