Measure the ceiling cut-out
Compare the actual opening with the model drawing. The outer trim diameter is a separate measurement and cannot substitute for the cut-out.

SMART LED DOWNLIGHT
A listed 2.5-inch, 9W downlight with Tmall Genie control and three white-light modes. Treat the nominal size separately from the required ceiling cut-out and test the selected mode switching.
PRODUCT DETAILS
PRODUCT DETAIL & BUYER BRIEF
Approve the physical opening, complete driver assembly and tested control arrangement for the project variant.
Compare the actual opening with the model drawing. The outer trim diameter is a separate measurement and cannot substitute for the cut-out.
Measure the recess, clearance above the ceiling and space needed for the driver and wiring before approving the fixture.
Identify the driver supplied with the quoted variant and check its dimensions, input label, connector and pack inclusion on a complete sample.
Measure the cut-out and trim on the 2.5-inch sample and cycle through the three listed light settings.
Set up only the app, remote or platform named for this version. Check first pairing, dimming and the state after power is restored.
If the project uses groups or a shared controller, operate the intended number of downlights together and record any start-up difference.
Request model-specific light data and the test conditions behind full-spectrum, low-blue-light or eye-care wording before approving project or retail claims.
Record the cut-out, trim, depth, driver, input, control path and unit count together on the sample approval and quote.
OEM & PRIVATE-LABEL OPTIONS
HAVE A PRODUCT IN MIND?
For nominal size and three light modes, send the opening, outer diameter, installation depth, power, driver, control method, quantity and project packaging needs.